100G QSFP28 ER4 EML Laser APD Receiver 40km LWDM4 QSFP28-ER4 Fiber Switch
100G QSFP28 ER4
Parameters
| Fiber Type |
Single-mode Cable |
| Connector |
LC |
| Lasers and TIA |
EML and APD |
| Tx Power |
-2.5 to 6.5 dBm |
| Rx Sensitivity |
<-18.5 dBm |
| Extinction Ratio |
4.5 dB |
| Power Consumption |
4.5 W |
| Single Power Supply |
3.3 V |
TOPSTAR’s TOP-QSFP28-100G-ER4 module is designed for 40km optical communication applications, and it is compliant to IEEE 802.3ba for 100GE Ethernet and ITU-T 4L1-9C1F for OTU-4.
This module contains 4-lane optical transmitter, 4-lane optical receiver and module manage- ment block including 2 wire serial interface.
The optical signals are multiplexed to a single- mode fiber through an industry standard LC connector. A block diagram is shown in Figure 1.
The LPMode pin shall be pulled up to Vcc in the module. The pin is a hardware control used to put modules into a low power mode when high. By using the LPMode pin and a combina- tion of the Power override, Power_set and High_Power_Class_Enable software control bits (Address A0h, byte 93 bits 0,1,2).
ModPrsL is pulled up to Vcc_Host on the host board and grounded in the module. The Mod- PrsL is asserted "Low" when inserted and deasserted "High" when the module is physically absent from the host connector.
PRODUCT FEATURES
- Compliant with QSFP28 Standard:
- SFF-8665 Revision 1.9, SFF-8636 Revision 2.6
- Compliant with 100G 4WDM-40 MSA technical specification rev 1.0
- High speed I/O electrical interface (CAUI-4) compliant with IEEE 802.3bm
- Single 3.3V Supply Voltage
- Maximum power consumption 4.5W
- 0-70 ºC Case Operating Temperature
- LAN WDM EML laser and APD Receiver
- QSFP28 MSA package with duplex LC connector
- Two Wire Serial Interface with Digital Diagnostic Monitoring
- Complies with EU Directive 2011/65/EU (RoHS compliant)
- Class 1 Laser
APPLICATIONS
- 100GBASE-ER4 100G Ethernet
- OTN OTU4 4L1-9C1F
- Telecom networking
- Data Center Interconnect
- Enterprise networking
FAQ
Q1. Are your transceiver modules compatible with Cisco?
A1: Yes, Topstar transceivers can compatible with Cisco. All the brand Topstar's SFP compatible as the fellowing:Cisco, Nortel, Juniper, 3COM, H3C, Alcatel-lucent, FOUNDRY, D-Link, EXTREME, Ruijie, NETGEAR, ZTE, Enterasys, ZyXEL, Linksys, Ericsson, DCN, Allied, SMC, Brocade, Force10, Hirschmann, Planet, Adtran, ASNTE, Trendnet, BDCOM, BLADE, BITWAY, Telco, Feixun...etc.
Q2. How does your company do regarding quality control?
A2: Every single optic individually tested in our test center , and also tested for compatibility on a variety of different brands of network equipment.
Q3. What are the trade terms?
A3: Lead Time: we keep 40,000pcs SFP in stock ready to ship.
Payment term: T/T, Western Union, Alipay, Paypal, L/C and so on for your option.
Q4. What is operating temperature range of optical modules?
A4: Commercial temperature range(COM) : 0 to 70°C(32 to 158°F)
Extended temperature range(EXT):-5 to 85°C(23 to 185°F)
Industrial temperature range(IND)::-40 to 85°C(-40 to 185°F)
Storage temperature range:-40 to +85°C(-40 to 185°F)
We can supply according to your request.
Product Tags:
|
|
QSFP 100G 40km EML Laser APD Receiver LWDM4 QSFP28-ER4 For Fiber Switch Images
|
