Arista 100GBASE ZR4 QSFP28 80KM SMF QSFP-100G-ZR4 Transceiver module

Description Of Fiber Optic Transceiver

Metro Data center interconnect (DCI) places more and more important role in hyperscale data center for sharing data center resources,business cloud migration and disaster recovery. In the industry, enterprise and Cloud ISP widely favor 100G 80KM DCI solution using 100GBASE-ZR4 Point to Point Ethernet intercoonect for the optimized cost efficiency, power consumption and sample system.

Top-Trans QSFP28 100G Module is designed for 100GBASE archictecture. This QSFP2 ZR4 transceiver uses LAN-WDM EML transmitter and SOA + PIN receiver to create the 100Gigabit connection via the fiber link over up to extended distance of 80km via the SMF. This QSFP28 module features the LC Duplex connector which can interoperate with other QSFP28 ZR4 optics. This QSFP28 module is fully MSA compliant and features the online DOM/DDM to monitor the operation status. This QSFP28 module can be programmed with the compatibility to interoperate with Arista Network QSFP28 ports.

Specification Of Fiber Optic Transceiver

Feature Of Fiber Optic Transceiver

• QSFP28 MSA compliant

• Hot pluggable 38 pin electrical interface

• 4 LAN-WDM lanes MUX/DEMUX design

• 4x25G electrical interfac

• Maximum power consumption 6.5W

• LC duplex connector

• Supports 103.125Gb/s aggregate bit rate

• Up to 80km transmission on single mode fiber

• Operating case temperature: 0℃ to 70℃

• Single 3.3V power supply

• RoHS 2.0 compliant

​Compatible platform

Arista 7050X3, 7050X4, 7358X4, 7060X, 7260X, 7130, 7170, 7280R, 7280R3, 7300X, 7388X5, 7368X4, 7500R, 7500R3, 7800R3

Application of Fiber Optic Transceiver

• Metro Data Center Interconnect

• 100GBASE-ZR4 Interconnect

​

QSFP28 Transceiver List

FAQ

• Can I use your QSFP28 module with Arista original QSFP-100G-ZR4 optics?

Yes, It can interoperate with Arista optics

• What's your optic warranty terms?

​

1 year free replace, 3 years free repairment for non-human made hardware defects

• What if I find your optics are not satifiying with our fiber link, occurs critical signal losses?

Our optics is produced using fresh new components through the strict QC control over parameter and performance test through error detector and eye diagram. The qualification ratio is over 99.9%. If any quality defects happen within the warranty, we will arrange the replace/repair service immediately

ISO9001 QSFP 100G ZR4

SMF QSFP 100G ZR4

80KM 100G QSFP28 Module

Arista 100GBASE ZR4 QSFP28 80KM SMF QSFP-100G-ZR4 Transceiver Module Images